WWW.BOOK.DISLIB.INFO
FREE ELECTRONIC LIBRARY - Books, dissertations, abstract
 
<< HOME
CONTACTS



Pages:     | 1 |   ...   | 2 | 3 || 5 |

«Overview Stellar Phoenix Windows Data Recovery - Professional edition is a complete solution to recover lost data from your hard disks, removable ...»

-- [ Page 4 ] --

Raw Recovery Raw Recovery allows you to recover data from hard disk, pen drive or volumes of a hard disk. It does a comprehensive scan of the volume to recover each and every bit of lost or deleted data. It searches for lost files on the basis of file signature. This recovery option recovers everything that is found in the selected source. This option is especially helpful in case of severely corrupted volume. You can select a source or define a region for scanning process. However, you cannot select region from a volume while performing Raw Recovery on the volume.

A long list of file types is provided in the Raw Recovery file type option. You can add file type, if the required file type is not listed in the file type list.

Resume Recovery You can use the Resume Recovery option of Windows Data Recovery to restart the recovery

of data. You can resume recovery by either:

• Using Scan Information File

• Using Hard Disk or Volume Image Both, the scan information file and image of a drive are saved as an image file (IMG). You can use an image file to restart recovery at any time.

You should save scan information file and image file of a drive at different locations with proper naming such that you can easily retrieve the required file for restarting recovery.

Recover using Scan Information File Scan information file contains information of a scanning process.

Scan information file is saved as an image file (IMG). You can save scan information file during any complete or incomplete recovery process. Image file can be used to restart recovery later.

For example, you saved image file of a scanning process and recovered only some files from that scan result. Later, you want to recover some more files from the same drive. You can use the saved image file to restart recovery.

Using a scan information file saves time, since scanning of each file does not take place. All files and folders shown after scan process will be shown Resuming recovery using image files on loading the image file created for that scan. In addition, if you have performed scanning process but not saved any files then you can use the image file to restart recovery at some other time.

You should remember the recovery process for which the image file was created. This is because you cannot perform a different recovery process by using a different image file. For example, an image file of quick recovery process restarts quick recovery not deleted file recovery.

To resume recovery by using scan information file:

1. Run Stellar Phoenix Windows Data Recovery software.

2. Click 'Recovery from Image' tab. Select the image file from the list, or click Browse.

3. In 'Open' dialog box, locate and select the scan information, and then click Open.

4. Click 'Scan Now', all files and folders will be listed. Select files to recover them.

Recover using Hard Disk or Volume Image Drive image is mirror image of a hard disk, pen drive, volume of a hard disk, or selected region of the listed source. Image file is saved as an IMG file. When you create an image, scanning process is not performed; instead a copy of the selected source is saved as IMG file. You can start recovery either after completion of drive imaging or at later time by using 'Recovery from Image' option.

To restart recovery by using

hard disk or volume image:

1. Run Stellar Phoenix Windows Data Recovery software.

2. Click Recovery from Image tab. Select the image file from Resuming recovery using image files the list, or click Browse.

3. In the Open dialog box, locate and select the image file of a hard disk or volumes, and then click Open.

4. A 'Select Volume to Recover Data' section will become visible. Volumes stored in the image file will be listed. Select the required volume.

5. In the flying pane, choose any one of the following recovery

options:

• Quick Recovery: This scan is fast and recommended.

• Deleted Recovery: Choose this to scan for deleted files.

–  –  –

Tip: It is recommended that you should save 'scan information file' and 'hard disk image' at different locations with proper name such that you can easily retrieve the required image file.

Create Image or Clone of a Hard Disk Windows Data Recovery allows you to create an image file of a hard disk or volume. Image of a hard disk or volume is saved as IMG file. You can use this IMG file to restart recovery at any time.

You can create image of an entire hard disk, volume, or selected region of hard disk or volume.

Mirror image (clone) of entire hard disk can also be created on another hard disk. You can use Advance Options of Windows Data Recovery to create clone. You can clone a hard disk but you cannot clone a logical volume.

• Create Image - This option has further two options. They are:

• Create Image of Entire Drive

• Create Image of Selected Region

• Create Clone of a Hard Disk

Create Image

You can create an image of different storage devices and save them as IMG file by using the Create Image option of Windows Data Recovery. The storage devices whose image you can





create are:

• Hard Disks

• Existing logical volumes in hard disks

• Removable media such as pen drives, external hard disks etc.

Images, of all sources, listed earlier are saved as IMG file. This IMG file is of same size as of the source. You can use the image files to resume recovery later.

There are two ways in which you can create images using Stellar Phoenix Windows Data

Recovery software:

• Create Image of Entire Drive

• Create Image of Selected Region Create Image of Entire Drive The image you create by using Create Image option of Stellar Phoenix Windows Data Recovery will be of same size as the selected hard disk, pen drive, or volume. Ensure that the location where image file needs to be saved has sufficient space to store the image file.

To create image file of entire hard disk, volume, or removable media:

1. Run Stellar Phoenix Windows Data Recovery software.

2. Under Advance Option tab, click Create Image.

3. In 'Select Volume to Create Image' section select the volume, or in 'Select Hard Disk to Create Image' section, select hard disk.

4. In the flying pane, click Start Imaging.

5. In 'Save As' dialog box, locate the destination where image file Create Image screen should be saved. In the File Name text box, type a name.

Click Save.

6. Disk Image Creation shows the image creation process.

When the image is successfully created, a message appears.

Click OK.

7. You can click Scan Now to start recovering files from the newly created image or start recovery later by using resume recovery option.

Create Image of Selected Region You can create an image of a selected region of hard disk, pen drive or logical volume. You will need to specify starting and ending sectors of the selected source. You can use this image file to resume recovery at any time.

To create image of selected region of source:

1. Run Stellar Phoenix Windows Data Recovery software.

2. Under Advance Option tab, select Create Image.

3. In 'Select Volume to Create Image' section select the volume, or in 'Select Hard Disk to Create Image' section, select hard disk.

4. In flying pane, click Select Select Specified Region prompt Region link.

5. In 'Select Specified Region' screen, drag the sliders to define starting and ending sectors of the image file. Click OK, and then click Start Imaging.

6. In 'Save As' dialog box, locate the destination where image file should be saved. In the File Name text box, type name.

Click Save.

7. Disk Image Creation shows the image creation process.

When the image is successfully created, a message appears.

Click OK.

You can click Scan Now to start recovering files from the newly created image or start recovery later

by using the Resume Recoveryoption.

Create Clone of a Hard Disk Clone Drive option of Stellar Phoenix Windows Data Recovery application allows you to create an exact replica of a hard disk. You will need to attach another hard disk for cloning the source hard disk. The size of the destination hard disk should be same or greater than the size of the source hard disk.

To clone a hard disk:

1. Run Stellar Phoenix Windows Data Recovery application.

2. Under Advance Option tab, Clone Drive.

3. Click 'Select Source Disk' list box to select source disk drive.

Click 'Select Destination Disk' list box to select destination disk drive.

4. Click Start Cloning.

–  –  –

View Hard Disk Status The drive status option of Windows Data Recovery shows information of the attached hard disk.

The Drive Status box displays model number, serial number, size, temperature, status, S.M.A.R.T feature and firmware revision number of an attached hard disk. In addition, S.M.A.R.T information is also listed in the S.M.A.R.T information box.

The Drive Information box shows information such as total sectors, sectors per track, number of cylinders and number of heads. The volume information box shows information of existing logical volumes in the hard disk.

To view hard disk status:

• Run Stellar Phoenix Windows Data Recovery software.

• Under Advance Option tab, Click Drive Status.

Drive Status screen shows all information related to selected hard disk.

Drive Status screen

Scan Hard Disk for Bad Sectors You can also scan your hard disk in order to see whether there are any bad sectors in your hard disk or not. The scanning process will show you all the bad sectors that have developed in the hard disk. You can use this option to scan and view the health of your hard disk.

To scan hard disk, perform the given below:

1. Run Stellar Phoenix Windows Data Recovery software.

2. Under 'Advance Option' tab, select Drive Status.

3. In flying pane, click Scan Disk. Bad blocks are shown in red color, if any, found in hard disk.

View Log Report You can view, clear, and save log report of processes that are processed in Stellar Phoenix Windows Data Recovery. Log report can be viewed in the 'Scan Result' window.

–  –  –

Configuration Settings You can change settings of Stellar Phoenix Windows Data Recovery software before scanning.

To configure Stellar Phoenix Windows Data Recovery software:

• Run Stellar Phoenix Windows Data Recovery. Click. Under General Settings tab,

configure general options:

–  –  –

• Click Add File Types tab to select, add, remove, or edit file type. This will become the default settings.

Selecting File Type File types give information about the type of file such as video, audio and its extension. You can select file types while performing signature search such that, scanning process should search only for the specified file types.

File types are listed in the Add File Types tab of Settings screen and Photo/Image File List screen in the Photo Recovery. The 'Software Name' column shows the software that created the files having the specified file type, 'File Extension' shows the extension of the file and size (KB) shows the maximum allowed size of files having the specified file type. The file types are categorized according to groups. File Type (s) includes every file type available in different file groups. Different groups are Application, Graphic, Pictures & Raster Images, Archive, Audio, video & Animation, Mails, Database, Office Documents, Internet, and Miscellaneous.

Photo/Image File List screen in the Photo Recovery shows only the file types of supported image files.

To select file types from file list for scanning:

1. Select the required file types.

2. Click OK.



Pages:     | 1 |   ...   | 2 | 3 || 5 |


Similar works:

«Max Mohr (1891-1937) ein Arzt auf der Suche nach Unabhängigkeit Von RALFBEERund FLORIAN STEGER Max Ludwig Mohr (1891-1937)1 war Arzt und einer der erfolgreichsten sowie bekanntesten Schriftsteller der Weimarer Republik; sogar im englischsprachigen Raum wurden einige seiner Dramen gespielt und gefeiert.? Für ein tiefer gehendes Verständnis seiner Werke ist die Lebensgeschichte von Max Mohr von hoher Bedeutung. Als drittes Kind eines jüdischen Malzfabrikanten wurde Mohr am 17. Oktober 1891 in...»

«Kantonsspital Baden AG Departement Innere Medizin CH-5404 Baden Prof. Dr. med. J. Beer Chefarzt Departementsleitung Kurzfassung der Studieninformation Details Seite ETNA-VTE-Europe Nicht-interventionelle Studie zur Edoxaban-Therapie in der klinischen Routinepraxis bei Patienten mit akuter venöser Thromboembolie in Europa Was wir Ihnen mitteilen möchten: Sie werden angefragt, an unserer Beobachtungsstudie teilzunehmen. Sie werden aufgrund Ihrer venösen Thromboembolie, das heisst tiefe...»

«HYDROLOGICAL PROCESSES, VOL. 11, 1197±1217 (1997) FOREST ECOSYSTEM PROCESSES AT THE WATERSHED SCALE: DYNAMIC COUPLING OF DISTRIBUTED HYDROLOGY AND CANOPY GROWTH D. SCOTT MACKAY 1Ã AND LAWRENCE E. BAND2 Department of Forest Ecology and Management and Institute for Environmental Studies, University of Wisconsin, Wisconsin, USA Department of Geography, University of Toronto, Canada ABSTRACT The hydrological recovery of watersheds from disturbances such as ®re and harvest can change the...»

«Concierge Practices Even for Doctors Who Don't Like the Idea Neil Chesanow January 09, 2014 [Medscape On Line] Elitist Medical Practice? Despite concierge medicine's reputation for being elitist, many doctors make the switch not because they want cushier lives but because they want more clinically challenging ones. In many cases, concierge practices enable them to better focus on their older, sicker patients, who rarely get the time they need in a conventional practice. These are the patients,...»

«Aus der Kinderund Jugendklinik der Friedrich-Alexander-Universität Erlangen-Nürnberg Direktor: Prof. Dr. med. Dr. h. c. Wolfgang Rascher Einfluss von Dexamethason auf endokrine Regulatoren der fetalen Programmierung in humanen Trophoblastenzellen Inaugural-Dissertation zur Erlangung der Doktorwürde der Medizinischen Fakultät der Friedrich-Alexander-Universität Erlangen-Nürnberg vorgelegt von Julia Seidel aus Gerlingen Gedruckt mit Erlaubnis der Medizinischen Fakultät der...»

«Therapeutic in vitro and in vivo approach of influenza virus infection by simultaneous reduction of virus titre and cytokine expression through inhibition of virus-induced NF-B and RafMEK-ERK activation Inaugural Dissertation submitted to the Faculty of Medicine in partial fulfilment of the requirements for the PhD-Degree of the Faculties of Veterinary Medicine and Medicine of the Justus Liebig University Giessen by Pinto, Ana Ruth Jorge Portugal Machado of Lisbon, Portugal Giessen 2008 From...»

«Internationale Arbeitsgemeinschaft Cannabis als Medizin Am Mildenweg 6 59602 Ruethen Tel.: +49 (0)2952-9708571 Fax: +49 (0)2952-902651 Email: info@cannabis-med.org Stellungnahme der deutschen Sektion der IACM zur Anhörung des Gesundheitsausschusses am 15. Oktober 2008 zur medizinischen Verwendung von Cannabisprodukten August 2008 Inhalt Vorbemerkung _ 2 Die Anträge an den Deutschen Bundestag _ 2 Der medizinische Bedarf an Dronabinol bzw. Cannabis _ 2 Dronabinol 2 Cannabis _ 3 Die...»

«Involvement of endoplasmic reticulum stress in β-cell apoptosis: a proteomic approach in INS-1E cells. D’Hertog W.1, Maris M.1, Ferreira G.B.1, Lage K.2, Hansen D.A.2, Cardozo A.K.3,Workman C.T.2, Moreau Y.4, Eizirik D.L.3, Waelkens E.5,6, Overbergh L.1 and Mathieu C.1.Affiliations: Laboratory for Experimental Medicine and Endocrinology (LEGENDO), University Hospital Gasthuisberg, Catholic University of Leuven, Herestraat 49, box 902, B-3000 Leuven, Belgium Centre for Biological Sequence...»

«Curriculum vitae Elvira Zimre-Grabensteiner PERSONAL INFORMATION WORK EXPERIENCE Medical Assessor March 2009–Present AGES Austrian Agency for Health and Food Safety, Austrian Medicines & Medical Devices Agency (Austria) Dossier evaluation, scientific advice Head of the Exotic Ambulance May 2009–April 2012 TIERplus Wien Stadlau (private small animal practice) (Austria) University Assistant October 2002–March 2009 University of Veterinary Medicine Vienna, Clinic for Avian, Reptile and Fish...»

«Format requirements for IJBCB articles For each article type, IJBCB has its own requirements regarding the article format. Please ensure you follow the exact guidelines (included below) for the specific article type you are submitting.The journal publishes the following article types: Short communications no invitation required, up to 3,000 words, 2 figures, 1 table Regular research articles no invitation required, up to 5,000 words Full-length Reviews upon invitation, 5,000 – 7,000 words In...»





 
<<  HOME   |    CONTACTS
2016 www.book.dislib.info - Free e-library - Books, dissertations, abstract

Materials of this site are available for review, all rights belong to their respective owners.
If you do not agree with the fact that your material is placed on this site, please, email us, we will within 1-2 business days delete him.